FOR HAIR COLORING AND PERMING

FUDGE Catalyst 3%, 6%, 9%, 12% oxidation emulsion 1000 ml. A gentle emulsion that conditions and protects hair. Follow the manufacturer's instructions carefully. Used with all hair dyes that mix with oxidant. For professional use only. Read the package leaflet before use. Caution: WARNINGS: Avoid contact of the product with the scalp! Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Store in a closed position. Work with gloves. Keep out of the reach of children. Professional product. Use only in the beauty salon.

STAPIZ Professional Color Art Desiree Bleaching Powder Violet 9+ Very strong hair bleaching powder 500 g. Super strong, fast-acting hair bleaching powder for professional hair bleaching. The formula provides whitening above 9 degrees. Usage: see in the package.

FUDGE Professional Clean Blond Pre-Toning Primer 150 ml. A fast-acting primer makes your blonde tone brighter and brighter. Hair is left stronger, smoother and prepared for an even tone. Use: spray into dry hair from roots to ends, leave on for 2 minutes. Then wash your hair with Clean Blonde Damage Rewind Shampoo.

Wella Multi Blond powder bleach (800ml) Tri-Lightening technology contains anti-yellowing molecules that help achieve a pure tone. Whitens up to 7 shades. The powder is mixed with Welloxon Perfect emulsion 6%, 9% and 12% or8 also with Color Touch emulsion 1.9% or 4% in a non-metallic container. Use: apply to unwashed hair. The exposure time depends on the condition of the hair. Mixing ratio from 1:1.5 to 1:2 (NOT 1:1). In contact with the scalp, use the oxidant Welloxon maximum up to 6%. Check the result every 5-10 min. Maximum exposure time up to 50 min. After the exposure time, rinse the product with warm water and wash your hair with shampoo. Composition (ingredient) and recommended: see on the package.

Coloring cream color – Kallos GLOW with Keratin 40 ml. Professional, permanent hair cream color with keratin and vitamin C. The color gives the hair shine, brightness and natural tones. Perfectly covers gray hair.

Coloring cream color – Kallos GLOW with Keratin 40 ml. Professional, permanent hair cream color with keratin and vitamin C. The color gives the hair shine, brightness and natural tones. Perfectly covers gray hair.

Coloring cream color – Kallos GLOW with Keratin 40 ml. Professional, permanent hair cream color with keratin and vitamin C. The color gives the hair shine, brightness and natural tones. Perfectly covers gray hair.

Dandy Black Gel is a black coloring gel for head and beard hair. The gel contains a special black tint to color gray and dull hair.

BLUE BLEACHING POWDER. Up to 7 tones. USE: Recommended mixing ratio 1:2. Bleaching powder needs to be rinsed after the procedure. Use protective gloves. Mix 1 part bleach in a non-metallic container powder with 2 parts 10 vol (3%), 20 vol (6%), 30 vol (9%) or 40 vol (12%) creamy oxidant. Use 40 vol (12%) cream oxidants for maximum whitening results. Take your pick the strength of the creamy oxidant according to the degree of bleaching, which you want to achieve, taking into account your hair type and structure. Blend the bleach and oxidizer with a brush to achieve a creamy finish consistency. Apply the mixed product to dry, unwashed hair. Leave the product to work until you get the desired whitening steps. Bleaching time: from 20 to 40 minutes. It is recommended to follow the process: check the processing time often hair until the desired result is obtained. Processing time is will depend on several factors, on the desired bleaching level, natural hair color, hair condition and room temperature. When the processing time is over, rinse your hair thoroughly with lukewarm water water, carefully removing the product, then wash your hair, using a mild shampoo. After use, the product is coarse close and store in a cool, dry place. Do not expose the product for activation of heat sources. FOR PROFESSIONAL USE ONLY.

BLUE BLEACHING POWDER. Up to 7 tones. USE: Recommended mixing ratio 1:2. Bleaching powder needs to be rinsed after the procedure. Use protective gloves. Mix 1 part bleach in a non-metallic container powder with 2 parts 10 vol (3%), 20 vol (6%), 30 vol (9%) or 40 vol (12%) creamy oxidant. Use 40 vol (12%) cream oxidants for maximum whitening results. Take your pick the strength of the creamy oxidant according to the degree of bleaching, which you want to achieve, taking into account your hair type and structure. Blend the bleach and oxidizer with a brush to achieve a creamy finish consistency. Apply the mixed product to dry, unwashed hair. Leave the product to work until you get the desired whitening steps. Bleaching time: from 20 to 40 minutes. It is recommended to follow the process: check the processing time often hair until the desired result is obtained. Processing time is will depend on several factors, on the desired bleaching level, natural hair color, hair condition and room temperature. When the processing time is over, rinse your hair thoroughly with lukewarm water water, carefully removing the product, then wash your hair, using a mild shampoo. After use, the product is coarse close and store in a cool, dry place. Do not expose the product for activation of heat sources. FOR PROFESSIONAL USE ONLY.

Coloring cream for men DANDY without ammonia 1:1 60 ml. Preparation: Always use appropriate disposable gloves when preparing and applying Dandy Hair Color. Colors can only be mixed with 10Vol. (3%) oxidants, in a 1:1 ratio. Pour 30 ml of color activator into a special container and add 30 ml of cream paint. Mix thoroughly until a homogeneous consistency. Application: apply the color to dry, unwashed hair with a brush. When coloring for the first time, apply to the roots, the entire length and ends of the hair. Leave for 5-10 min., then rinse with a large amount of water until the color is completely washed off. Wash your hair with a special shampoo. Instructions: observe the curing time of the paint. If kept longer, the hair tone may become too intense. Re-dyeing: first apply to the roots of the hair, then move to the entire length and finally to the ends of the hair. Leave, maximum, for 5-10 min. Rinse and wash with a special shampoo. Do not use metal objects, combs. Precautions: The cream contains diaminebenzene, diaminotoluene, phenylenediamine, resorcinol. For professional use only. Do not use the color in case of inflammation of the scalp or in case of sensitive skin, which may cause an allergic reaction. Temporary black henna tattoos can cause an allergic reaction. We recommend performing a 48-hour test to determine skin sensitivity. Do not use for coloring eyelashes and eyebrows. If color gets into eyes, rinse immediately with water.

BLACK PROFESSIONAL LINE BLEACHING POWDER UP TO 10 TONES HAIR BLEACHER WITH KERATIN 500 g. High potency whitener with keratin. Whitens up to 10 shades. The formula is enriched with keratin, which restores hair and prevents breakage. Soft texture, easy blending, excellent adhesion. Use: Pour the necessary amount of bleaching powder into a non-metallic container. Add oxidant 3, 6, 9, 12% (10, 20, 30, 40 vol.) to the product, in a ratio of 1:2. Depending on the dyeing technique and the desired result, the ratio of bleaching powder and oxidant can vary from 1:1 to 1:2. Mix the products thoroughly until you get a homogeneous consistency. The strength of the oxidant and the application time depend on the chosen technique, the desired result and the starting tone. TIME OF USE: apply the product to the hair and leave until the desired result is achieved, but leave for no longer than 40 min. Bleaching powder for natural and colored hair.

BLACK Professional Line Bleaching Powder PLEX Technology Bleaching powder with protective properties 500ml. An ideal choice for hair bleaching and hair fiber protection. Guarantees whitening up to level 9. Thanks to PLEX technology, which softens hair bleaching, protecting the hair during the entire procedure. The agar-agar contained in the composition, obtained from red algae, contains a large amount of pantothenic acid, vitamins E and K, which strengthen hair fibers during bleaching. *Bleaching up to level 9 is possible with double use without stressing the hair fibers. Use: Pour the necessary amount of bleaching powder into a non-metallic container. Add oxidant 3, 6, 9, 12% (10, 20, 30, 40 vol.) to the product, in a ratio of 1:2. Depending on the dyeing technique and the desired result, the ratio of bleaching powder and oxidant can vary from 1:1 to 1:2. Mix the products thoroughly until you get a homogeneous consistency. The strength of the oxidant and the application time depend on the chosen technique, the desired result and the starting tone. TIME OF USE: apply the product to the hair and leave until the desired result is achieved, but leave for no longer than 40 min. Bleaching powder for natural and colored hair. Do not allow the product to come into contact with the skin.

KALLOS COSMETICS PLEX BOND BUILDER BLEACHER 500 g Bleaching powder with PLEX formula. Whitens up to 10 degrees. This bleaching powder whitens faster and provides care for natural and colored hair. Protective formula PLEX preserves the natural state of the hair without damaging it. Application: Place the bleach in a glass or plastic container and add 50 g of oxidation emulsion (3, 6, 9, or 12%) for every 25 g of bleach. Leave on for a maximum of 45 minutes. Bleach is mixed in a ratio of 1:2 (one part bleach and two parts oxidation emulsion). WARNINGS: Avoid contact with eyes and skin. If the product gets in the eyes or on the skin, immediately flush the eyes or skin with plenty of water and consult a doctor. Use protective gloves. Follow the instruction. Protect from children. Do not use the product on eyelashes and eyebrows. Protect from heat and light. For professional use only.